SOILOC - PAM™ SOIL BINDING AGENT / SOIL FLOCCULANT: (Approved by GA DOT)
|
1.0 MATERIAL DESCRIPTION:
ANIONIC POLYACRYLAMIDE:
SOILOC-PAM is a super absorbent polymer. It is supplied in a fine, white crystal for easy
application. ENVIRONMENTALLY FRIENDLY: NON TOXIC TO PLANTS & ANIMALS -
NON-CORROSIVE. CONTAINS NO CALCIUM CHLORIDE OR PETROLEUM PRODUCTS.
2.0 INTENDED USE:
SOILOC-PAM is a well know soil binding agent / flocculant. Primary Uses: Staging areas, rough
grading areas, soil stockpiles, borrow areas, after final grade and before final seeding, phased
projects, other exposed areas.
3.0 PHYSICAL PROPERTIES:
Appearance: White granules Weight (dry product) : 5 lbs/gal. Stability (dry product) : 5 years Stability (in solution): 7-10 days Odor: Odorless
|
|
|
|
A. Dry Application: Mix 1:1 w/sand. Broadcast mixture directly on ground @ 10# - 150# / acre.
|
|
|
|
|
Mixing: Do not add water to SOILOC-PAM. If water is added to SOILOC-PAM, globs may form that can clog dispenser. Instead, add SOILOC-PAM slowly to water while agitating. If mixing together with mulch/seed/dye, SOILOC-PAM should always be the final additive to the mixture. Do not mix more thean 5# / 1,000 gal. water.
|
|
|
Spray directly on ground @ 10# - 150# / acre.
|
|
|
Maximum application rate shall not exceed 200# / acre / year to comply with EPA Regulations.
|
|
|
|
|
5.0 PACKAGING:
55 lb. bag.
6.0 STORAGE:
KEEP FROM FREEZING.
STORE IN A WATER-TIGHT CONTAINER
7.0 CAUTION:
KEEP OUT OF REACH OF CHILDREN.
CLEAN - UP SPILLS ON HARD SURFACES IMMEDIATELY.
WILL CAUSE HARD SURFACES TO BECOME SLIPPERY WHEN WET.
AVOID BREATHING PAM DUST.
8.0 CLEAN - UP:
All equipment can be cleaned with water and brush.
9.0 FOR FURTHER INFORMATION:
HERCULES ENVIRONMENTAL, inc. Manufactures several different standard dust & erosion
control products. For further information contact distributor.
Manufactured by: HERCULES ENVIRONMENTAL, Inc. 6596 New Peachtree Rd. Doraville, GA 30340 770-303-0878 fax-770-455-6531
|